 products
|
| catalog download
|
|
|
|
|
|
|
|
|
|
single end square nose, two flute, and multi flute, regular length, long flute length and extra long length
single end, square end end mills are designed for production milling of slots, pockets, keyways and other general purpose work.
material: hss
finishing: fully ground/tin coated
made to din844, din327, iso, ansi standard
|
|
|
single end bal nose, two flute, multi flute, regular length, long flute length, and extra long length
single end, ball nose end mills may be used for milling radius bottom slots, fillets, rounding the bottoms of holes and all-round use in die work.
material: hss
finishing: fully ground/tin coated
made as per din844, din327, iso, ansi standard
|
|
|
end mills with parallel shank
used for a wide range of milling such as slotting and surface milling, three type of teeth, coarse, middle and fine
material: hss
finishing: fully ground/tin coated
made to din/iso/ansi standard
|
|
|
end mills with threaded shank
threaded shank made as per bs122
|
|
|
single end two flute, regular length and extra long length, for aluminum
these endmills are designed to cut aluminum and non-ferrous materials at high material removal rates, therefore, providing better work piece tolerances, surface finishes and cuts without vibration, chatter or scaring.
material: hss
finishing: fully ground
made to din/iso/ansi standard
|
|
|
roughing end mills, with center cutting
roughing end mills, with center hole
roughing endmills are used for heavy machining operations where maximum stock removal at high feed rates is required.
available in standard regular length series and long series.
material: hssm2-al, finishing: ground, milled
|
|
|
double ended end mills
two flute, square nose, ball nose
four flute, square nose, ball nose
material: hss
as per iso/din/ansi standard
|
|
|
end mills with mores taper shank
single end, multi flute
material: hss
as per iso/din/ansi standard
|
|
|
end mills with threaded shank
material: hss
threaded shank made to standard: bs122
finishing: solid ground
|
|
|
micro grain solid carbide end mills, tialn coating
m icro-grain solid carbide end mills were developed for machining tough work hardening metals, stainless steel, titanium, monel, inconel, and super alloys. it is extremely shock resistant
single end, two flute, square nose, ball nose
single end, four flute, square nose, ball nose
|
|
|
hss slitting saws
outside dia:60 -200mm
thickness:1.0 -6.0mm
dia of hole:16.0 -32.0mm
special sizes as per buyer’s request available
|
|
|
|
|
|
|
